frasaco phantom head P-6 with exchangeable articulator P-3
The articulator P-3 has anatomically shaped condyle boxes to allow
for simulation of corresponding human masticatory functions within
three-dimensional curved condylar paths. The model jaws and articulations
are positioned in the correct anatomical relationship and the
natural excursions of the mandible can be reproduced exactly. The
vertical adjustment allows for mounting of different model jaws.
The robust skull dome is coloured throughout in grey with a plastic
coat of approx. 3 mm thickness, to prevent paint to splinter off and
to allow scratches to be polished out. The neck articulation is located
in the anatomically correct position at the cranial base and is used
to position the head. The robust lift inside the skull dome provides
access to a starwheel bolt which releases the face mask holding plate.
In order to allow anatomical face bows to be mounted, a nose has
been added to the skull dome and the articulator P-3 is provided with
corresponding fixing pins. Should the mandible be opened to 15mm
distance between upper and lower incisal edges, a deflection roller
makes the heads of the condyles slide forward as with a patient. All
components are made of high-grade materials and all fixing bolts are
protected against loss. A face mask can be gripped between the liftplate
and the articulator plate (dental model not included)
Example for ordering a complete frasaco phantom head
Phantom head
1 frasaco phantom head P-6/3
Mask
1 frasaco face mask P-6 GM
Water drainage
1 frasaco water drainage nozzle P-6 W
Hose
1 water drainage hose (1.20 m) P-6 SL
Bottle
1 water collector bottle P-6 F
Model
1 upper and lower model jaws frasaco AG-3
Mounting
1 frasaco table mounting assembly P-TDGP
P-6/3 PRO P-6/3 PRO is a new special version of the bestselling frasaco P-6/3
phantom head, which has been optimized and adapted to the specific
needs of education in prosthodontics.
The incisal distance has been increased from approx. 42 to 52 mm
with gliding condyle paths. An incisal pin is included for exercises with
edentulous models. 2 additional pressure pins have been added to
the condyle boxes. With these centric locks the centric position of the
condyles can be determined and set with precision. All other features
are exactly corresponding to P-6/3, so that the same accessories can
be used and all combinations with mounting systems etc. are possible
as with P-6/3.
